truSculpt iD vs. CoolSculpting: Which Stands Out as The Better Choice?
Article At A Glance
- CoolSculpting freezes fat cells with controlled cooling, while TruSculpt iD uses radiofrequency for combined fat reduction and skin tightening.
- TruSculpt iD offers faster results, less discomfort, and shorter recovery, treating more body parts.
- Both have over 20% average fat reduction, but CoolSculpting has more potential side effects.
Introduction To Non-invasive Fat Reduction Procedures
Many people struggle with fat reduction. Even the average gym goer who works out, eats well, and does a lot of cardio may still find removing those stubborn fat pockets challenging. That’s where body sculpting comes in.
If you were undergoing a body contouring procedure in the past, you typically had to choose an invasive fat removal procedure like Liposuction or a tummy tuck. Board-certified plastic surgeons perform invasive fat removal procedures, changing entire silhouettes daily. However, such dramatic changes have drawbacks like discomfort, swelling, infections, and other side effects.
Sculpting is the alternative. As one of the most popular cosmetic procedures or aesthetic treatments, sculpting targets specific areas of stubborn fat and is either invasive or non-invasive. For example, let’s compare truSculpt iD vs. CoolSculpting, two of the most popular non-invasive fat reduction procedures.
What Is CoolSculpting: How Does it Freeze and Eliminate Fat Cells?
When you compare it to cosmetic surgery, non-invasive fat reduction techniques take a radically different approach. Rather than rapid changes, non-invasive methods use gentler, non-surgical methods to induce lipolysis (the process of fat cell breakdown) and stimulate the body’s natural functions to eliminate the destroyed fat.
CoolSculpting, a non-invasive treatment, frees fat cells in targeted areas. Freezing fat cells effectively breaks them down, triggering the body’s natural processes to excrete the dead fat cells (called cryolipolysis). Here’s how that works:
- The individual performing the procedure typically places a cup-like device or applicator on the skin over the targeted area.
- The applicator suctions the skin and underlying fat into the device to deliver controlled cooling.
- This process freezes the fat cells while sparing the skin and other structures from injury.
After CoolSculpting, your lymphatic system will absorb the dead fat cells and transport them to the liver for processing before natural elimination.
truSculpt iD Advantage: An Alternative Fat Freezing Treatment
The sculpting alternative is truSculpt iD, which uses monopolar radiofrequency technology to target fat cells in specific areas. Unlike CoolSculpting, truSculpt iD heats the stubborn fat cells and destroys them. This technique uses several handpieces that offer various placement options to target multiple placement areas simultaneously.
truSculpt iD removes deeper fat layers while stimulating collagen to tighten your skin. Trained practitioners typically customize treatment into 15-minute protocols that can treat the entire abdomen or multiple areas of stubborn fat simultaneously.
truSculpt iD and CoolSculpting: Which Treatment is Faster?
The human body has a resting temperature of about 96 to 99 degrees Fahrenheit.
- truSculpt iD uses heat for fat reduction, so reaching the required therapeutic temperature of 104 degrees Fahrenheit takes less than a minute.
- CoolSculpting requires much more time to reach the required therapeutic temperature, which is way below the body’s resting temperature.
While both procedures require the targeted areas to experience the temperature needed for fat removal, the relatively longer time required for CoolSculpting to reach therapeutic temperatures adds significant time to the procedure.
Evaluating Effectiveness: Which Treatment Provides Better Results
When comparing truSculpt iD vs. CoolSculpting, both have impressive success rates and can lead to the desired results. truSculpt iD has an average fat reduction rate of 24%, whereas CoolSculpting yields a 20 to 25% fat reduction rate.
Remember the different methods to calculate the average fat reduction rates for either procedure. Fewer patients qualify for CoolSculpting, and since the procedure only treats fewer areas, it skews the data in CoolSculpting’s favor.
Safety Considerations: Examining the Side Effects and Risks of Each Procedure
While both procedures are FDA-approved and ensure patient safety, they have a few adverse effects.
truSculpt iD offers a high treatment comfort, often likened to a hot stone massage. However, after a truSculpt iD procedure, you can expect the treated area to stay warm to the touch. You might also feel sore, be slightly red for about an hour with mild sensitivity to touch, and experience sweating.
Common side effects of CoolSculpting include the following:
- Paradoxical Adipose Hyperplasia in reaction to cryolipolysis, which results in the fat cells expanding rather than breaking down
- Swelling
- Temporary redness
- Muscle spasms
- Tingling
- Firmness
- Bruising
- Tenderness
- Cramping
- Aching
- Itching
- Stinging
- Skin sensitivity
- Diarrhea
Downtime and Recovery Periods Associated With truSculpt iD and CoolSculpting
truSculpt iD has absolutely no downtime. You can resume daily activities and exercise almost immediately after the procedure.
Some patients consider CoolSculpting an uncomfortable experience. The pain may persist in the treated area well after completing treatment.
truSculpt iD vs. CoolSculpting Results
truSculpt iD results appear after a short period, with full effects becoming visible between four weeks to three months after treatment. Your body’s natural processes break down fat cells during that period.
CoolSculpting, on the other hand, takes about three to four months to see results. Your body removes the dead fat cells more gradually.
Make a choice: Is truSculpt iD Better Than CoolSculpting?
Is TruSculpt better than CoolSculpting? The short answer is yes. Based on a detailed comparison, truSculpt iD is a better fat-reduction procedure than CoolSculpting, as it can reduce fat anywhere on the body while improving your skin’s overall texture.
While truSculpt iD vs. CoolSculpting will prove effective fat reduction procedures, the former offers more efficiency, promising shorter treatment times and less discomfort. As suggested by Clinical & Aesthetic Dermatology research, over 43% of truSculpt iD patients had a 75% improvement, while only 4% had less than a 25% improvement. Moreover, experts consider monopolar radiofrequency technology among the safest non-invasive procedures in the market.
With truSculpt iD, patients have more than a 25% chance of improvement, and you can see the results within weeks.
Benefits of truSculpt iD Over Coolsculpting
- truSculpt iD can treat multiple areas simultaneously, whereas CoolSculpting only treats one at a time.
- truSculpt iD can remove non-pinchable fat and treat people with a BMI over 30 (and even areas with a tattoo).
- truSculpt iD significantly improves skin tightness, which matters after weight loss.
- Unlike CoolSculpting, truSculpt iD involves minimal patient discomfort and no swelling or bruising. You can have a truSculpt iD procedure over lunch break and resume work afterward.
truSculpt iD Results—Before & Afters
[GALLERY]
Make an Informed Decision for Fat Freezing Treatment With Jovem Medspa
Choosing a fat-freezing treatment requires careful consideration as you want to decide based on individual goals and preferences. While truSculpt iD employs radiofrequency energy and offers efficient results across diverse body parts, CoolSculpting freezes fat cells for natural elimination.
Making an informed choice requires an assessment of treatment goals, personal preferences, and potential downtime. You want to consult a qualified practitioner who will evaluate your medical history, body type, and desired outcomes to guide the decision-making process.
Factors like convenience, comfort, and ability to address specific target areas also matter. Ultimately, an informed decision requires understanding how each treatment works, considering individual needs, and relying on expert guidance for optimal results.
Call Jovem Medspa For Fat-Reduction Options and More
You don’t have to worry about choosing between truSculpt iD vs. CoolSculpting when you book a consultation at Jovem Medspa.
We’ll help you achieve your body contouring goals with the proper fat reduction procedure for your needs under Dr. Abha Gyani’s direction. Call Jovem Medspa at (210) 900-3945 to schedule an appointment.
About The Author
